The 12V or 24V battery charger is designed for mounting in a vehicle or in a stationary engine, and manages heat dissipation so no fan coding is required. It charges a 12V lead acid battery as well as other battery chemistries. The battery charger has a maximum output power of 350 W in model AX090550 and the maximum output power of model AX090560 is 405W. See datasheet for a detailed outline of all features.
Applications
Off-highway Vehicles, Lift Equipment, Electric Vehicles, Fleet and Utility Vehicles, Emergency
Vehicles
Power Gensets, Oil and Gas Equipment, Electric Utility Substation Switchgear
120 VAC, 208VAC or 240VAC nominal
95 to 260 VAC, 45/65 Hz power supply range
(60 Hz units and 50/60 Hz units)
Power factor correction >0.99 @ 120VAC; >0.98 @ 240VAC
Two internal fuses L and N, 8A, 250VAC
Control logic:
Standard embedded software
Battery charger setpoints can be viewed and configured through the CAN bus
using the Axiomatic Electronic Assistant (EA)
Communications:
1 CAN port (ISO 11898 compatible)
Termination resistor is not installed.
SAE J1939 stack; Baud Rate: 250 bit/sec.
Electrical Connections:
1 CAN port (ISO 11898 compatible)
Termination resistor is not installed.
SAE J1939 stack; Baud Rate: 250 bit/sec.
Enclosure:
ACD12 Die Cast Aluminum Enclosure and Lid, Hard Anodized to MIL-A-8625
Type II Class I Clear Hard Anodize
Molded EPDM Gasket
Molex Connectors (See electrical connections.)
11.83 x 8.74 x 3.88 inches (300 x 222 x 98 mm)
L x W x H excluding power cable assembly
Protection Rating:
OEM model: IP67
Operating Conditions:
-40 to 70°C (-40 to 158°F) for input >170VAC
-40 to 60°C (-40 to 140°F) for input 90 to 170 VAC
PDF Datasheet:
Click icon for PDF datasheet.
This is a unique website which will require a more modern browser to work!