The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features 1 CAN port for user-defined communications over the bus. It accepts up to 8 analog (0-5V, 0-10V, 0-20 mA or 4-20 mA) or digital or PWM frequency inputs and provides 8 analog outputs (0-5V, 0- 10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.
Model AX030210 adds a digital input, resistive input, 2 voltage references and a relay output. RS-232 is not supported in this model.
The controller belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.
Applications
- Power Generation
- Cogeneration
- Stationary Power
- Large Engines
| Technical Specifications: | Analog I/O Module |
| Order Code: | P/N: AX030200 P/N: AX030210 |
| Power: | 9…32VDC (12VDC, 24VDC nominal) |
| Inputs: | 8 inputs are user selectable from the following: 0-5V, 0-10V, 4-20 mA or 0-20 mA Digital inputs for interface to switches, etc. PWM signal, pulse or 16-bit counter inputs from sensors or diesel engine ECM’s Enable or disable input commands |
| Digital Input: | 1 (in model AX030210) |
| Resistive Input: | 1 (in model AX030210) |
| Outputs: | 8 analog outputs (0-5V, 0-10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA) |
| Relay Output: | 1 Form C (in model AX030210) |
| +V References: | 2 +5V/+10V References (in model AX030210) |
| Control logic: | Standard embedded software (For application-specific control logic, contact manufacturer.) |
| Communications: | SAE J1939 (CANopen: P/N AX030201 or AX030211) 1 RS-232 (in model AX030200 only) |
| User Configurability: | P/N: AX070502 The Electronic Assistant) is a software configuration tool that runs on the Windows operating system and is connected to a J1939 bus via an USB to CAN converter. |
| Enclosure: | 8-pin connector - Deutsch IPD DT13-08PA 40-pin connector - Deutsch IPD DRC13-40PA Aluminum extrusion with stainless steel end plates. 5.86 x 5.60 x 2.87 inches 149.00 x 142.24 x 73.00 mm (W x L x H excluding mating connectors) |
| Protection Rating: | IP65 |
| Operating Conditions: | -40 to 85°C (-40 to 185°F) |
| PDF Datasheet: |  AX030200 - Click icon for PDF datasheet. AX030210 - Click icon for PDF datasheet. |